SINTOKOGIO (GUANGZHOU)CO.,LTD
Products
New East is a trusted equipment manufacturer worldwide
Products
QKSB-10/25/25A/50 monorail hook cleaning machine
Equipment features: ● It is very suitable for sand cleaning of castings and surface treatment of welded parts with complex shapes. The workpiece is hung in the air and rotated during ejection. Unlike the rotating table type, the bottom surface of the workpiece can also be shot blasted. ● Shot blasting chamber adopts high wear-resistant hard protection, and all direct parts of the projectile are lined with high wear-resistant alloy cast iron, which effectively prevents the projectile from wearing the chamber shell. ● Equipped with various accessories selected by customers, the door opens and closes automatically, and the plan of various lifting paths is designed for customers to choose.
QSNM-24CA catenary cleaning machine
Equipment features: ● Improve the service life of stabilizer bar and other parts ● QSNM24CA is a special strengthening machine manufactured to improve the service life of stabilizer bar. Standard specification: 1. Treatment products and purpose: shot blasting of stabilizer bar; 2. Size of treated workpiece: outer diameter of rod ∅ 11~36,X: length 380L ~ 1300L,Y: height 140H ~ 600H,Z:0~200 temperature: normal temperature. If the workpiece has oil, please degrease it. 3. Reference workpiece: outer diameter after tooling with length 1300L and height 250H is installed with workpiece: ∅ 1400; 4. Strengthening strength (reference workpiece): the arc height value is above 0.30mmA ~ 0.50mmA and the coverage rate is above 95%; 5. Processing capacity (reference workpiece): actual capacity is 400 pieces/Hr(9 seconds/1 piece) (assuming rod diameter: ∅ 20) about 30 pieces/hook, projection time is 2.67min (about) + conveying time is 1.83min (about), the number and method of hanging parts of the workpiece shall be confirmed through tests. 6. Use projection material: steel wire cut shot (after rounding treatment) ∅ 0.7mm (hardness: equivalent to HRC60);7. Maximum size of cleaning: ∅ 2400*1600H Weight: 500kg/hanging; 8. Arc height value and coverage rate vary with the measurement position and product shape;
QSNM-15 catenary cleaning machine
Standard Specifications
○ Processing products and purposes: large castings sand cleaning;
○ Size that can be handled:
Maximum lifting weight: 1000kg
Workpiece diameter: OD ∅ 1500*1600H
Workpiece temperature Normal temperature
○ Processing capacity: projection time is about 6min/hook (depending on the product situation)
Moving speed: 6 m/min
○ Use steel shot: QB14 ~ 17
QSNM-10 catenary cleaning machine
Standard Specifications
○ Processing products and purposes: large castings sand cleaning;
○ Size that can be handled:
Maximum lifting weight: 500kg
Workpiece diameter: OD ∅ 600*1400H
Workpiece temperature Normal temperature
○ Processing capacity: change depending on the condition of the product
Moving speed: 10 m/min
○ Use steel shot: QB14 ~ 17
QSHBX-III hook type cleaning machine
Equipment features: ● Two-station suspension type, realizing uniform processing without bruises, cracks, defects and defects. ● Three-point stop function can be set to achieve large projection range and uniform cleaning effect. ● In the process of shot blasting, the workpiece can be loaded and unloaded, which improves the work efficiency and shortens the processing time. ● Large spot inspection door is adopted on the side, which is easy to carry out spot inspection and parts replacement. Maximum workpiece single weight (kg/hook) 50 Maximum workpiece size (mm)Φ700*1000H
QSHBX-II hook type cleaning machine
Equipment features: ● Two-station suspension type, realizing uniform processing without bruises, cracks, defects and defects. ● In the process of shot blasting, the workpiece can be loaded and unloaded, which improves the work efficiency and shortens the processing time. ● Large spot inspection door is adopted on the side, which is easy to carry out spot inspection and parts replacement. Maximum workpiece single weight (kg/hook) 50 Maximum workpiece size (mm)Φ400*750H
QSHBX-I hook type cleaning machine
Equipment features: ● Two-station suspension type, realizing uniform processing without bruises, cracks, defects and defects. ● In the process of shot blasting, the workpiece can be loaded and unloaded, which improves the work efficiency and shortens the processing time. ● Large spot inspection door is adopted on the side, which is easy to carry out spot inspection and parts replacement.
SHB-0B hook type cleaning machine
Equipment features: ● Introduction of new cleaning equipment produced by Japan's new industrial technology. It is mainly used for cleaning and strengthening of small parts (such as motorcycle cylinders, etc.) and collision-prone parts. ● The machine is composed of shot blasting device, hook (2-bit conversion) and rotation device, steel ball circulation system, mechanical vibration bag filter and other main parts. Reasonable structure and convenient installation. Two work stations are arranged at 180 degrees in the cleaning room, one of which can conveniently load and unload workpieces while performing shot blasting. ●The machine has low operating noise, good sealing performance, safe and reliable operation, and the safety protection device is used at the door of the cleaning room, which provides a good working environment for the operator. Maximum workpiece single weight (kg/hook) 50 Maximum workpiece size (mm)Φ400*750
QSNBX-III crawler cleaning machine
Features ● The oil cylinder is used to drive the door body up and down, which is easy to open and close ● The door adopts a non-pellet structure, and the steel pellets flow back to the cleaning room ● The door is sealed to prevent steel pellets and dust from overflowing ● The pellet leakage amount is close to "0" (less than 1kg/year, the conditions stipulated by our company) specifications: processing capacity (m³/batch) 0.28 maximum processing weight (kg/batch) 560 maximum workpiece single weight (kg/piece) maximum workpiece length (mm/piece) 400
QSNBX-II crawler cleaning machine
Features ● High efficiency and uniform projectile effect ● Low noise and high quality treatment effect ● Due to the adoption of non-joint crawler, the collision between the machine and the treatment product can be alleviated when the product rolls over, which can not only finish the high quality, but also reduce the noise of the working environment. ●The machine is small in size, compact in design, and takes up less space, which is convenient for site layout. Specifications: processing capacity (m³/batch) 0.15 maximum processing weight (kg/batch) 300 maximum workpiece single weight (kg/piece) 30 maximum workpiece length (mm/piece) 400
QSNBX-I crawler cleaning machine
Features ● High-efficiency mixing and uniform processing through crawler. The small design of dust removal machine 1 body, saving space. ●By adopting lightweight projection door and container handle, it is easy to switch and reduce the burden of staff. ●It can be transported by forklift, easy to install and move. Specifications: processing capacity (m³/batch) 0.1 maximum processing weight (kg/batch) 140 maximum workpiece single weight (kg/piece) 15 maximum workpiece length (mm/piece) 300
QSNB-II crawler cleaning machine
Features ● High efficiency and uniform projectile effect ● Low noise and high quality treatment effect Due to the use of non-joint crawler, the collision between the machine and the treatment product can be alleviated when the product rolls, which can not only finish the high quality, but also reduce the noise of the working environment. This machine is small in size, compact in design, less space occupied, easy to site layout. The compact design makes it easier to install the layout. Specifications: processing capacity (m³/batch) 0.28 maximum processing weight (kg/batch) 560 maximum workpiece single weight (kg/piece) 30 maximum workpiece length (mm/piece) 400
QSNB-I crawler cleaning machine
Features Low noise, high quality treatment effect due to the use of non-joint track, can ease the collision between the machine and the processing product when the product rolls, not only can carry out high quality finishing, but also reduce the noise of the working environment. ●The machine is small in size, compact in design, and takes up less space, which is convenient for site layout. The compact design makes it easier to install the layout. Specifications: processing capacity (m³/batch) 0.1 maximum processing weight (kg/batch) 140 maximum workpiece single weight (kg/piece) 15 maximum workpiece length (mm/piece) 300
QSNB-50 & 50W crawler cleaning machine
Features ● High efficiency and uniform projectile effect ● Low noise and high quality treatment effect Due to the use of non-joint crawler, the collision between the machine and the treatment product can be alleviated when the product rolls, which can not only finish the high quality, but also reduce the noise of the working environment. 3. The machine is small in size, compact in design, and takes up less space, which is convenient for site layout. The compact design makes it easier to install the layout. Specifications: processing capacity (m³/batch) 0.5 maximum processing weight (kg/batch) 1000 maximum workpiece single weight (kg/piece) 50 maximum workpiece length (mm/piece) 400
QS326JS crawler cleaning machine
● This series of cleaning machine is our company developed and sold for many years of high-efficiency cleaning equipment, on the basis of QS326, the operation of Japan's new east of advanced technology, after reasonable design and improvement, so that the overall performance of the product has been improved, whether it is shot blasting cleaning or dust removal effect than before the improvement has been greatly improved. This series of products are widely used in all walks of life of small castings, stamping parts, non-ferrous metal castings, gears and springs of sand rust removal, removal of oxide skin and surface strengthening. This machine is equipped with a mechanical vibration bag filter, and the dust emission concentration meets the requirements of national standards. This machine covers less area, low noise, stable performance, safe and reliable, high cleaning efficiency, and is equipped with necessary accessories, vulnerable parts for users to choose. Specifications: workpiece maximum single weight (kg)10 maximum weight (kg)200 production efficiency (kg/h)600~1200
QCND-I/QCND-II drum cleaning machine
Features: ● Xindong's unique roller shaking structure is adopted. In the process of shot blasting, the roller not only rotates but also swings up and down, so the workpieces in the roller are stirred without omission, and the steel balls are uniformly projected to achieve uniform treatment effect. ● The cleaning room adopts a simple structure, which can clean general castings and forgings, and can be handled from small to large. Equipment maintenance is simple, the number of wearing parts is small, saving maintenance time and cost. Specifications: QCND-IQCND-II processing capacity (m³/batch) 0.30.6 maximum processing weight (kg/batch) 6001200 maximum workpiece unit weight (kg/piece) 3540 maximum workpiece length (mm/piece) 400550
QCNDX-01 drum cleaning machine
Features: small parts, thin parts without clip, crack, defect and other phenomena occur, to achieve the improvement of the surface quality of the workpiece. ● Batch processing, the workpiece will not remain in the equipment, can be completely discharged. ● Improve the stirring of the workpiece, remove the publicity process when the drum moves in and out, and shorten the production cycle. ● The drum can be replaced from the top of the equipment to shorten the replacement time of the drum. ● When the equipment is in standby state, the dust collector will stop automatically to save energy. ● The shot blasting device is installed in the best position for shot blasting efficiency, which can reduce the replacement frequency of consumables and improve work efficiency. ● Safety light curtains are installed in the feeding area of the equipment to effectively isolate the operators from the movable parts and ensure the safety of the operators. The use of special stirring edge, to achieve short time and high efficiency of shot blasting processing. Specifications: processing capacity (m³/batch) 0.06 maximum processing weight (kg/batch) 150 maximum workpiece single weight (kg/piece) 10 maximum workpiece length (mm/piece) 200
Steel shot steel sand projection material
• Bailida steel shot steel grit specifications SAE uses QB-25QB-20S-780S-660 large cast iron, cast steel, cast iron pipes, large forgings, heat treated parts sand cleaning, rust removal QB-17QB-14S-550S-460 large and medium cast iron, cast steel, forged parts, heat treated parts, steel plates, steel pipes sand cleaning, rust removal, strengthening, forming QB-12QB-10S-390S-330 medium and small cast iron, malleable cast iron, small and medium cast parts, heat treated products, steel plates, steel pipes, structural steel parts, chains, chains, non-iron alloy, rust removal, strengthening, forming QB-8S-280 small cast iron, small casting products, heat treatment products, cast aluminum, steel plate, cast copper alloy, gold plating before treatment, enhance elasticity and toughness QB-6QB-5QB-3S-230S-170S-110 stainless steel plate, thin steel plate, non-ferrous alloy surface coating before treatment, enhance elasticity and toughness, wire strengthening treatment QB-25(SAES-780)QB-20(SAES-660)QB-17(SAES-550)QB-14(SAES-460)QB-12(SAES-390)QB-10(SAES-330)QB-8(SAES-280)QB-6(SAES-230)QB-5(SAES-170)QB-3(SAES-110) steel grit specification SAE application QG-20QG-17QG-14G-12G-14G-16 cleaning large and medium cast steel, cast iron, forged products, steel, steel plate, rubber adhesion pretreatment and other QG-12QG-10QG-7G-18G-25G-40 stone cutting, grinding processing, rubber adhesion pretreatment, pretreatment of steel plate, container, hull steel plate coating, spray washing medium and small cast steel, cast iron, forged products, etc. Rust removal of QG-4QG-3QG-2G-50G-80G-120 steel wires, wrenches and steel pipes, pre-plating treatment, spray washing QG,H,L,P-17(SAEG-14)QG,H,L,P-14(SAEG-16)QG,H,L,P-12(SAEG-18)QG,H,L,P-10(SAEG-25)QG,H,L,P-7(SAEG-40)QG,H,L, p-4 (SAEG-50)
CX6i single-station grinding machine
Features of the equipment: small installation area, saving human resources-one operator can operate several sets, simple teaching programming, simple high-performance operation, simple tooling replacement, shortened preparation time, diamond tools to reduce operation cost and cut powder, and high-efficiency and high-speed dust treatment improves productivity and quality.
Features of the equipment: ● Automatic pouring operation comparable to that of professionals ● High-precision casting can greatly improve the operation efficiency ● High-speed casting operation can reduce energy consumption ● Existing pouring bags can be used ● The introduction of the equipment can be completed in a short period of time ● The amount of rare earth elements can be saved ● The metal liquid material can be freely changed
OMEGA sand regeneration USR series
Equipment features: ● Through the pressure adjustment of the pressure roller, the best regeneration effect can be achieved for alkali phenolic sand, polyurethane modified phenolic sand, water glass sand, tide mold sand, etc. ● Energy-saving production through high-efficiency regeneration. ● Compact design with micro-powder removal inside. ● Long life through wear-resistant parts.
Sand regeneration technology patent technology: through the rotating pressure roller to pressurize the sand layer, the friction between the sand particles will peel off the aging binder, to achieve sand.
Equipment features:
● Through the semi-magnetic outer wheel type magnetic separator, effective separation of sand and iron.
●Using permanent magnets, long-term trouble-free operation, saving energy consumption
FDNX horizontal parting box molding machine
Application of air-flow sand filling technology that can produce high-quality castings.
· Styling capacity 100molds/hr
Quiet working environment with low noise 72dB
· Simple installation, only need to access the power supply (100VAC-240VAC), compressed air and sand to start modeling
· Ideal for switching from manual styling processes to automatic styling
FCMX horizontal parting box molding machine
Features
■ Excellent sand hardness and precision through air-flow sand technology and central support structure
■ Compaction pressure balance control technology ensures shape stability by improving the versatility of the plate and preventing deformation of the plate
■ Sand mold height feedback technology can reduce sand consumption and compensate for changes in compaction rate
■ Environmental protection and energy saving, noise level as low as 75dB(A)
Fill in your needs