SINTOKOGIO (GUANGZHOU)CO.,LTD
Products
New East is a trusted equipment manufacturer worldwide
Products
Plant centralized dust removal
Customize the centralized dust removal system according to the specific situation of the plant.
The centralized dust removal system is to concentrate many dust producing points and even the dust producing points of the whole workshop or the whole plant into one dust removal system for treatment. It is suitable for dust production point, relatively concentrated, each point of the exhaust air volume, and conditional setting of large dust removal facilities.
Q2605-AB-08 shot blasting machine
Features of the equipment: ● Gravity introduction mixing method is adopted. After being mixed and accelerated by gravity and injection force with air flow, the mixing ratio of pills and air is large and the injection volume is large. ● Visualization, easy to clean, clean indoor lighting, through the observation window can clearly observe the operation process and workpiece cleaning status. Internal cleaning nozzle, can be convenient to clean the residual dust on the workpiece. ● Compact structure, simple operation, is a small turntable sandblasting machine, compact and reasonable structure, sandblasting control using hand buttons and foot switches in two forms. Name Technical Specification Cleaning Room Size (mm)1000L × 1000B × 1800H Spray Gun Manual Spray Gun 1 Spray Gun Diameter: Φ 8 ~ Φ 10, Continuous Working Air Pressure (Mpa)0.4~0.6 Minimum Air Consumption (M/min)3.5 Dust Collector JZC12 Mechanical Shock Air Volume: 10m ³/min, Air Pressure: 2.5Kpa Electric Control System Power Supply: 380V/50Hz, Operating Voltage: 220V/50Hz type (model) manual trolley diameter: φ800mm ~ 1700mm; Maximum load: 1500Kg
Features: ● This machine is a small rotary type sandblasting (pill) cleaning equipment, compact structure, reasonable, simple operation, sandblasting control using hand button and foot switch in two forms. The method of sand (pellets) entering the air stream is gravity introduction. It is accelerated by the double action of gravity and injection force and mixed with air flow to the workpiece. The mixing ratio of pills and gas is large, and the injection volume is large. ● The cleaning room is equipped with lighting lamps, which can clearly observe the operation process and the cleaning state of the workpiece through the observation window. The cleaning chamber is equipped with a cleaning nozzle, which can easily purge the residual dust on the workpiece.
SNC56ZA closed barrel cleaning machine
Equipment features This machine is designed for the paint removal of open barrels. The equipment consists of steel shot projection device (shot blasting device), cleaning room, workpiece rotation device, steel shot recovery device, etc. The open barrel is placed on the fixed arm of the conveying device and conveyed one by one through the stepping arm of the conveying device. The projection area is equipped with a self-rotating roller, and the opening cylinder is thrown while rotating on the self-rotating roller to drop the paint. The thrown steel shot is sent to the hoist by the screw conveyor, and then sent to the separator by the hoist. Dust and broken steel shot will be separated and removed here, and the usable steel shot will be sent to the shot blasting machine through the introduction pipe. The generated dust is removed by suction by the dust removing device. Rollers for rotation and stepping arms for transportation. In order to prevent wear, wear plates are fixed with bolts, and the cleaning room is protected by steel guard plates. Specifications 1. Cleaning workpiece: metal round roller ∅ 600 * 900L (side and upper and lower surfaces);2. Cleaning capacity: 240 pieces/hour, but it will vary according to the thickness of the paint film; 3. Projection material: QB-3,QB-6,QB-8
KSB-KK hook catenary cleaning machine
It is used for steel structure parts of 1 ~ 10ton, and is used for pre-coating treatment. A series of models are available according to different workpiece sizes and weights. The main features of the equipment: 1. The shot blasting device is easy to maintain ① The guard plate has two end guards, two side guards, a top guard plate, and a surrounding guard plate. It is composed of 6 parts and the number of parts is small. ② The end guard plate and the side guard plate adopt a linear fitting method, which is easy to install and disassemble. ③ The overall structure of the side guard plate, if the gasket is removed, the impeller can be removed from the top of the cover without removing the side plate. ④ The top guard plate only needs to be placed in the corresponding position. 2. Through the design of the placement position of the throwing head covering the workpiece as a whole, the selection of the material of each guard plate in the direct and reflective parts, the assembly method of the guard plate, the countermeasures for pill leakage, etc., stable operation is realized on the basis of the design paying attention to details.
This machine is a trolley-type shot blasting cleaning equipment for rollers. The roller is strengthened by shot blasting to obtain a surface with a certain roughness to improve its surface quality. (1) steel grade: cast Cr3 or cast Cr5 hardness Hs93 ~ 100 (2) workpiece specification: Φ 425 ~ Φ 480 '1450mm (total length Max3805mm)Max 2900kg (3) cleaning efficiency: Φ 425' 1450mm within 15min (according to the time of upper and lower parts within 3min) Φ 480 '1450mm within 20min (according to the time of upper and lower parts within 3min) (4) shot quality: n surface disordered textization, no line, twill and color difference n coverage: 95% n uniform roll surface roughness, Ra0.5 ~ 5um (above Hs97 cannot be guaranteed)
SNC45RA steel plate cleaning machine
Features of shot blasting equipment 1. High-efficiency shot blasting device is installed 2. Multiple shot blasting devices are installed to improve efficiency. 3. Various excellent anti-wear countermeasures. 4. Non-contact steel shot recovery device without adjustment. Main equipment specifications and models SNC40RASNC45RASAC30RASAC45RA shot blasting machine quantity 1012810 steel plate width mm4000450030004500 processing speed (Class A plate) 5566
QSHBX-III-AL aluminum parts cleaning machine
Equipment features: ● Due to the hanging type, the workpiece will not produce cracks, collapse marks, touch marks and other phenomena; ● Adopt Xindong's unique [Related Fire and Explosion Prevention] and other contents, and adopt corresponding countermeasures. ● Energy saving and high efficiency (Y-30 shot blasting machine);● Can widely handle all kinds of workpieces; ● Due to the double station, parts can be cleaned and unloaded at the same time, with high operation rate; ● Integrated design of dust collector and main machine, covering a small area; Maximum workpiece single weight (kg/hook) 50 Maximum workpiece size (mm)Φ700*1000H
Equipment features: ● Equipped with a general-purpose shot blasting device, which can effectively inhibit deformation and remove burrs during die casting cleaning. ● The equipment adopts double station, which can load and unload the workpiece at the same time of cleaning, so as to improve the work efficiency. ● The zinc-based projection material is used to effectively reduce the potential safety hazard of dust explosion. ● Used for surface cleaning of thin-walled die castings, which can inhibit deformation, remove burrs, and remove casting marks and cracks for small and medium-sized parts.
KAC-2I profile through type cleaning machine
Equipment features: ● The use of this equipment to process the friction surface of the joint of H-shaped steel is compared with the grinding operation, with short time, good effect and high efficiency. ● Shorten the processing time (1/10 of the grinding operation) ● The smoothness of the projection processing surface is the largest ● Relieving the burden of operators related to grinding ● The advantages of the above three cleaning equipment are to contribute to the rationalization, labor saving and energy saving of steel bone processing.
SNT-0MA spring strengthening machine
Equipment characteristics: 1. Processing workpiece size: φ156 ∽ φ414mm; Processing capacity: up to 240 pieces/hour, which varies according to the arc height value, projectile coverage rate and different materials of the user's strengthened workpiece. 2. The large working table of this machine is in the form of continuous operation, and the whole machine for loading and unloading workpieces will not stop. 3. The surface of the workpiece to be treated shall not contain grease; 4. Workpiece strengthening parameters: arc height value 0.21~0.24(mm); The projectile coverage rate is 70%; Projection material QB-5 (0.5mm).
SCCA2 spring strengthening machine
Equipment features: Suspension springs are widely used in the automotive industry, and the service life of the spring will seriously affect the comfort and safety of the car. Therefore, improving the life of the spring has become the top priority for all suspension spring manufacturers. SCCA2 is a special spring strengthening machine manufactured to improve the life of the spring.
SAC-1CA spring strengthening machine
Equipment features: ●Suspension springs are widely used in the automotive industry, and the service life of the spring will seriously affect the comfort and safety of the car. Therefore, improving the life of the spring has become the top priority for all suspension spring manufacturers. ● SAC1CA is a special spring strengthening machine manufactured to improve the life of the spring.
Equipment features: ● SNC-100K type bar surface cleaning machine is a new type of cleaning equipment produced by Japan's Xindong Industrial Technology. It is mainly used for oxide scale cleaning and surface strengthening of the outer surface of 15~105mm bars or pipes. ● Shot blasting machines can be set according to different cleaning capabilities and effects. ● Drum-shaped tracks are adopted to make the bar rotation achieve uniform bar surface cleaning.
Equipment features: ● According to the different diameter of the material, select the appropriate blade, projectile density, short projectile distance, high production efficiency. ● Unique guide design, so that the various surfaces of the wire to be effective and uniform cleaning. The use of high chromium blade mechanism to simplify the design, improve the service life, maintenance is simple and easy. ● Suitable for carbon steel, alloy steel, fast cutting steel, spring steel and other materials of wire rod. The dust collector adopts the new east standard fire countermeasures, including continuous dust removal structure and calcium carbonate input device, which can effectively reduce the possibility of fire to a minimum.
QSNC6RB roller type shot blasting machine
This equipment is a roller type shot blasting machine. From the input of the product to the discharge of the shot-blasting product, it is handled by automatic operation. The workpiece rotation mechanism of the driving roller table is adopted. The steel shot is projected, and the product rotates under the drive of the rotation device, and the shot is projected evenly. The main features of the machine are as follows:(1) high efficiency, uniformity due to the use of workpiece rotation mechanism, steel shot in the projection, rotation device drive product rotation, projectile projection uniform. (2) No small parts, thin-walled parts are also very suitable for cleaning room using roller structure manufacturing, all kinds of casting, forging parts, but also can handle the possibility of jamming press parts.
QSNC4RA roller type shot blasting machine
This machine is a roller table through continuous cleaning equipment. Shot blasting is used to remove the surface scale and obtain a surface with a certain roughness to improve its surface quality. This machine is mainly composed of inlet conveying device, outlet conveying device, tooling return device, roller assembly, cleaning room, dust removal system, air circuit system, flow adjustment device, upper spiral, lower spiral, hoist, separator, shot blasting device Assembly, electronic control system and other parts. Specifications: 1. processing products: aluminum products 2. product size: 228B * 259L * 144H131B * 225L * 63H maximum through size 400B3. Applicable projection material: Φ0.6.
QSNTX-I/II rotary cleaning machine
Equipment features:
● The opening range of the projection door is large, and the moving in and out of the workpiece is convenient.
● Through the unique sliding structure of the turntable, the workpiece can be realized without collision marks and even treatment of damage.
● The combination of tooling inside and outside is processed at the same time (optional), and the workpiece does not need to be reversed to shorten the processing time.
● Less constraints on the size and shape of the workpiece, high versatility. So the most suitable for many varieties of a small amount of processing.
QSNT-1PE turntable cleaning machine
Equipment features: ● Rotary worktable makes this machine very versatile. It is very simple and easy to handle workpieces that are not suitable for hook-type crawler shot blasting machine. Low noise, high quality processing, processing on the workbench, work without touch knock scars, not only can get the high quality treatment effect, but also make the working environment low noise. ● Dust removal machine and host integration, so compact design, so that the machine is very convenient and flexible.
QSNT-1A turntable cleaning machine
Equipment features: ● The workpiece to be cleaned is placed on a low-speed rotating worktable, and the shot blasting device is set on the upper part and side of the casing to eject the workpiece to be cleaned. The ideal and uniform cleaning effect can be received in a short time, and the unique luster of metal is presented within a few minutes. ● The placement and removal of the product is very simple. The workbench is installed on the rotary door with bearings. With the opening of the door, the workbench is turned out, and the workpiece is very convenient to take and place. ● After the door is closed, the workbench is just below the shot blasting machine. ● In addition, there is a time relay to control the projectile time, which can automatically stop.
QSNT-0PB turntable cleaning machine
Equipment features: ● This machine is a rotary type shot blasting machine. Shot blasting is used to remove oxide skin and burrs on the surface of the workpiece, or to obtain an ideal and uniform surface effect, so that the workpiece presents a unique luster of metal.
QKSB-200 monorail crane hook cleaning machine
Equipment features: ● It is very suitable for sand cleaning of castings and surface treatment of welded parts with complex shapes. The workpiece is hung in the air and rotated during ejection. Unlike the rotating table type, the bottom surface of the workpiece can also be shot blasted. ● Shot blasting chamber adopts high wear-resistant hard protection, and all direct parts of the projectile are lined with high wear-resistant alloy cast iron, which effectively prevents the projectile from wearing the chamber shell. ● Equipped with various accessories selected by the customer, the door opens and closes automatically, and the plan of various lifting paths is designed for the customer to choose, which can be designed and manufactured according to the customer's requirements, with a maximum lifting weight of 20 tons (including tooling).
QKSB-100/100LS monorail hook cleaning machine
Equipment features: ● It is very suitable for sand cleaning of castings and surface treatment of welded parts with complex shapes. The workpiece is hung in the air and rotated during ejection. Unlike the rotating table type, the bottom surface of the workpiece can also be shot blasted. ● Shot blasting chamber adopts high wear-resistant hard protection, and all direct parts of the projectile are lined with high wear-resistant alloy cast iron, which effectively prevents the projectile from wearing the chamber shell. ● Equipped with various accessories selected by customers, the door opens and closes automatically, and the plan of various lifting paths is designed for customers to choose.
Fill in your needs