SINTOKOGIO (GUANGZHOU)CO.,LTD
Products
New East is a trusted equipment manufacturer worldwide
Surface treatment equipment
Surface treatment equipment
Attractive surface treatment, so that the possibilities of the product can be realized.
View more
QKSB-10/25/25A/50 monorail hook cleaning machine
Equipment features: ● It is very suitable for sand cleaning of castings and surface treatment of welded parts with complex shapes. The workpiece is hung in the air and rotated during ejection. Unlike the rotating table type, the bottom surface of the workpiece can also be shot blasted. ● Shot blasting chamber adopts high wear-resistant hard protection, and all direct parts of the projectile are lined with high wear-resistant alloy cast iron, which effectively prevents the projectile from wearing the chamber shell. ● Equipped with various accessories selected by customers, the door opens and closes automatically, and the plan of various lifting paths is designed for customers to choose.
QSNM-24CA catenary cleaning machine
Equipment features: ● Improve the service life of stabilizer bar and other parts ● QSNM24CA is a special strengthening machine manufactured to improve the service life of stabilizer bar. Standard specification: 1. Treatment products and purpose: shot blasting of stabilizer bar; 2. Size of treated workpiece: outer diameter of rod ∅ 11~36,X: length 380L ~ 1300L,Y: height 140H ~ 600H,Z:0~200 temperature: normal temperature. If the workpiece has oil, please degrease it. 3. Reference workpiece: outer diameter after tooling with length 1300L and height 250H is installed with workpiece: ∅ 1400; 4. Strengthening strength (reference workpiece): the arc height value is above 0.30mmA ~ 0.50mmA and the coverage rate is above 95%; 5. Processing capacity (reference workpiece): actual capacity is 400 pieces/Hr(9 seconds/1 piece) (assuming rod diameter: ∅ 20) about 30 pieces/hook, projection time is 2.67min (about) + conveying time is 1.83min (about), the number and method of hanging parts of the workpiece shall be confirmed through tests. 6. Use projection material: steel wire cut shot (after rounding treatment) ∅ 0.7mm (hardness: equivalent to HRC60);7. Maximum size of cleaning: ∅ 2400*1600H Weight: 500kg/hanging; 8. Arc height value and coverage rate vary with the measurement position and product shape;
QSNM-15 catenary cleaning machine
Standard Specifications
○ Processing products and purposes: large castings sand cleaning;
○ Size that can be handled:
Maximum lifting weight: 1000kg
Workpiece diameter: OD ∅ 1500*1600H
Workpiece temperature Normal temperature
○ Processing capacity: projection time is about 6min/hook (depending on the product situation)
Moving speed: 6 m/min
○ Use steel shot: QB14 ~ 17
QSNM-10 catenary cleaning machine
Standard Specifications
○ Processing products and purposes: large castings sand cleaning;
○ Size that can be handled:
Maximum lifting weight: 500kg
Workpiece diameter: OD ∅ 600*1400H
Workpiece temperature Normal temperature
○ Processing capacity: change depending on the condition of the product
Moving speed: 10 m/min
○ Use steel shot: QB14 ~ 17
QSHBX-III hook type cleaning machine
Equipment features: ● Two-station suspension type, realizing uniform processing without bruises, cracks, defects and defects. ● Three-point stop function can be set to achieve large projection range and uniform cleaning effect. ● In the process of shot blasting, the workpiece can be loaded and unloaded, which improves the work efficiency and shortens the processing time. ● Large spot inspection door is adopted on the side, which is easy to carry out spot inspection and parts replacement. Maximum workpiece single weight (kg/hook) 50 Maximum workpiece size (mm)Φ700*1000H
QSHBX-II hook type cleaning machine
Equipment features: ● Two-station suspension type, realizing uniform processing without bruises, cracks, defects and defects. ● In the process of shot blasting, the workpiece can be loaded and unloaded, which improves the work efficiency and shortens the processing time. ● Large spot inspection door is adopted on the side, which is easy to carry out spot inspection and parts replacement. Maximum workpiece single weight (kg/hook) 50 Maximum workpiece size (mm)Φ400*750H
QSHBX-I hook type cleaning machine
Equipment features: ● Two-station suspension type, realizing uniform processing without bruises, cracks, defects and defects. ● In the process of shot blasting, the workpiece can be loaded and unloaded, which improves the work efficiency and shortens the processing time. ● Large spot inspection door is adopted on the side, which is easy to carry out spot inspection and parts replacement.
SHB-0B hook type cleaning machine
Equipment features: ● Introduction of new cleaning equipment produced by Japan's new industrial technology. It is mainly used for cleaning and strengthening of small parts (such as motorcycle cylinders, etc.) and collision-prone parts. ● The machine is composed of shot blasting device, hook (2-bit conversion) and rotation device, steel ball circulation system, mechanical vibration bag filter and other main parts. Reasonable structure and convenient installation. Two work stations are arranged at 180 degrees in the cleaning room, one of which can conveniently load and unload workpieces while performing shot blasting. ●The machine has low operating noise, good sealing performance, safe and reliable operation, and the safety protection device is used at the door of the cleaning room, which provides a good working environment for the operator. Maximum workpiece single weight (kg/hook) 50 Maximum workpiece size (mm)Φ400*750
QSNBX-III crawler cleaning machine
Features ● The oil cylinder is used to drive the door body up and down, which is easy to open and close ● The door adopts a non-pellet structure, and the steel pellets flow back to the cleaning room ● The door is sealed to prevent steel pellets and dust from overflowing ● The pellet leakage amount is close to "0" (less than 1kg/year, the conditions stipulated by our company) specifications: processing capacity (m³/batch) 0.28 maximum processing weight (kg/batch) 560 maximum workpiece single weight (kg/piece) maximum workpiece length (mm/piece) 400
QSNBX-II crawler cleaning machine
Features ● High efficiency and uniform projectile effect ● Low noise and high quality treatment effect ● Due to the adoption of non-joint crawler, the collision between the machine and the treatment product can be alleviated when the product rolls over, which can not only finish the high quality, but also reduce the noise of the working environment. ●The machine is small in size, compact in design, and takes up less space, which is convenient for site layout. Specifications: processing capacity (m³/batch) 0.15 maximum processing weight (kg/batch) 300 maximum workpiece single weight (kg/piece) 30 maximum workpiece length (mm/piece) 400
QSNBX-I crawler cleaning machine
Features ● High-efficiency mixing and uniform processing through crawler. The small design of dust removal machine 1 body, saving space. ●By adopting lightweight projection door and container handle, it is easy to switch and reduce the burden of staff. ●It can be transported by forklift, easy to install and move. Specifications: processing capacity (m³/batch) 0.1 maximum processing weight (kg/batch) 140 maximum workpiece single weight (kg/piece) 15 maximum workpiece length (mm/piece) 300
QSNB-II crawler cleaning machine
Features ● High efficiency and uniform projectile effect ● Low noise and high quality treatment effect Due to the use of non-joint crawler, the collision between the machine and the treatment product can be alleviated when the product rolls, which can not only finish the high quality, but also reduce the noise of the working environment. This machine is small in size, compact in design, less space occupied, easy to site layout. The compact design makes it easier to install the layout. Specifications: processing capacity (m³/batch) 0.28 maximum processing weight (kg/batch) 560 maximum workpiece single weight (kg/piece) 30 maximum workpiece length (mm/piece) 400
Fill in your needs